Wood Floor Cleaner

Wood Floor Cleaner Instructions

For best results, and to get maximum coverage when cleaning wooden flooring, use in conjunction with our Spray Mop. Dilute the Wood Floor Cleaner with water at a ratio of 9:1 (water:cleaner), if using the spray mop use 450ml water and 50ml cleaner to fill the reservoir.

The cleaner can also be mixed and used with a traditional mop and bucket, but you will get better coverage and minimise over wetting the floor if using a spray mop. 

For dirtier floors, stains, or to infuse the product’s wonderful orange aroma into the room, you can increase the amount of cleaner used up to a ratio of 1:1.

Once cleaned, the cleaner evaporates quickly to leave your wooden floor dry and streak free. Within about 15 minutes depending on the humidity. 

Using Wood Floor Cleaner - step by step

Be careful when cleaning wooden floors not to wet the floor too much. Over wetting the floor can cause the wood to swell at the joints, which can then result in splits and gaps in the floor; or water damage (darkening of the wood) along the joints.

This is why we strongly recommend to always clean wooden floors using the Spray Mop. The mop sprays a controlled amount of Wood Floor Cleaner onto the floor, so you never need to worry about causing any damage.

Fill the container on the Mop with Wood Floor Cleaner (mixed 9:1 with water) and spray the cleaner onto the floor. Push the mop though the cleaner and the microfibre mop head will absorb the liquid and dirt from the floor. Repeat this process cleaning the entire floor; always spray then mop as you go.

Once you’ve finished cleaning the floor, leave the floor to dry for about 15 minutes and you’ll be left with a lovely clean, and streak free finish to the floor. You should then protect the floor using either our Wood Floor Polish, or Maintenance Oil (for oiled, or UV oiled flooring).