Car Touch Up Photos - Furniture Clinic
Leather Care & Repair Specialists

Call Us on:

Leather Car Interior Touch Up Repair Photos
 

BEFORE
Car Seat - before
AFTER
Car Seat - After
Car: Mazda
Job: Restore missing colour and light wear & tear on drivers side bolster
Process: Gently sand the bolster with fine sandpaper (600grit+) then prep & alcohol clean. The sanding will make the leather smooth. Sponge 1 coat of colour on and then spray a second on top to blend the colour in. You only need to spray the bolster. Then seal and finish with satin.
Kit: Small leather colourant kit with a colour match
Cost: £50 Small Colourant Kit + £10 colour match fee. TOTAL = £60

 
BEFORE
Car Seats - Before
AFTER
Car Seats - After
Car: Mitsubishi Warrior
Job: Colour the leather to hide the gloss paint stain
Process: Prep and alcohol clean the leather to reduce the gloss paint. From our experiences it is almost impossible to 100% remove gloss paint from leather, and so, we now spray the black colourant on top of the stain to hide it. Once the stain is hidden, the leather can then be sealed and finished.
Kit: Small Leather Colourant Kit (black, satin)
Cost: £50

 
BEFORE
Porsche Seat - before
AFTER
Porsche Seat - After
Car: Porsche 911
Job: Restore scuffing on drivers bolster
Process: Using 600grit+ sandpaper, gently sand the leather to make smooth. Then prep and alcohol clean. If the surface still feels rough, sand it again. Sponge on 1 coat of colour and then spray a second on top for a uniform and blended finish. Then seal and spray on satin finish.
Kit: Small Leather Colourant Kit (black, satin)
Cost: £50

 
BEFORE
Range Rover Seat - Before
AFTER
Range Rover Seat - After
Car: Range Rover
Job: Repair missing colour caused by constant wear & tear from getting in and out of vehicle.
Process: Rub the seats down with the leather prep and alcohol cleaner to make ready for colour. Then sponge on one coat and spray a second coat on for a uniform finish. Seal and finish with a satin spray.
Kit: Small Leather Colourant Kit (matched colour, satin)
Cost: £50 Small Kit + £10 colour match fee. TOTAL = £60

 
BEFORE
BMW Seats - before
AFTER
BMW Seat - After
Car: BMW 7 Series
Job: Restore missing colour on drivers side bolster
Process: As the damage is minimal, just wipe the leather down with the alcohol cleaner on a cloth. Then spray the colour on - DO NOT sponge it on as this fills the holes. Then seal and finish with matt.
Kit: Small leather colourant kit with a colour match
Cost: £50 Small Colourant Kit + £10 colour match fee. TOTAL = £50

 

 

RETURN TO LEATHER COLOURANT KIT