1. To cut a sample of leather from your sofa to send to us, there are two places you can get it from. The first is from the bottom of the sofa. Turn the sofa onto its side or back as shown in the picture and you will see a cloth stapled to the framework.
2. There is always an overhang of leather beneath the cloth. Using a screw driver or other sharp object, leaver out several screws and then peel back the cloth.
3. You will then see (as shown) an overhang of leather stapled to the framework. Again, you will need to pluck out the staples.
4. After removing the staples cut a piece of leather from the overhang.
It has to be bigger than a 5p, if you cannot get soemthing that big then send us as many small pieces as you can.
Remember: The bigger the sample, or the more you send, then the better we can match the colour.
Option 2
If you cannot get a sample from underneath then the next best place is from one of the cushions. Undo the zip as shown in the photo and then find where the leather is stitched together.
Where it is will be an overhang of leather. The leather here is normally thin so it is best to send us several strips.
After removing a piece of leather send it to us either with a covering letter or print out one of the forms below.
Home | Services | Trade Area | Message Board | Training 
UK Branches | About Us | Contact Us
