Pre-Coats & Repairers
 |
Leather Revive - Oil based conditioner used to soften old, dried out and hard leathers |
 |
Leather Revive is a water based oil emulsion that forms a rich cream like product. When applied to leather, the product penetrates the surface, coating each individual fibre with a balanced application of natural oil making the leather much softer. The product revives older leathers that have become hard, brittle and dried out.
|
 |
Leather Binder - Thin liquid used to strengthen heavily worn & cracked leather |
 |
Leather Binder is a thin liquid that can be used to strengthen leather where the surface has broken causing the leather to crack and become brittle.
The binder soaks into the leather fibres holding them tightly together creating a much stronger leather structure. This stronger structure greatly improves the tensile strength of the leather, which makes repairing leather easier and gives better end results.
|
 |
Adhesion Promoter - Improves the adhesion of colourants to leather & vinyl |
 |
Adhesion Promoter is a polyurethane liquid with extraordinary adhesive properties. Applied to leather or vinyl one step before the application of colourant, the product creates a flexible coating that binds to the leather surface. When the colourant is then applied, it sticks to the layer of Adhesion Promoter, rather than the leather.
|
 |
Heavy Filler - Thick paste filler used for filling scratches & holes |
 |
The heavy filler (also called repair compound), can be used to fill any type of damage in leather where the surface or leather has been broken. Common problems it is used for are;
- Cracking – large and small areas
- Holes & Tears
- Scuffs & Scratches
You can also mix the leather colourant with the filler to match the colour of the leather you are repairing.
|
 |
Flexifil - Extremely flexible filler used to fix heavy cracking |
 |
Flexifil has been developed to meet the requirements of heavy usage and extreme flexing on leather. The product is used to fix cracking on high use areas of leather for a long lasting repair. Once repaired the product remains very elastic and will move and flex with the leather without cracking.
|
 |
Leather Glue - Very flexible and strong, used for gluing leather |
 |
The leather glue, once set, is an extremely hard wearing and flexible glue designed specifically for use on leather.
Unlike others glues, this product remains flexible and will never become hard and brittle. This allows you to make repairs on areas of leather that are prone to a lot of flexing, with a reassurance that your repair will last.
It is used to offer strength to a deep scratch repair or to attach backing cloths to the flesh side of leather before filling.
|
 |
Grain Copier - Special mould to take an imprint of a leathers grain pattern |
 |
Grain Copier is a two part silicone used for making Grain Pads. The product comes in two bottles: Base & Hardener. When mixed together the hardener activates the base causing it to set like rubber. If this mixture is poured onto the leather, when it sets, it takes an imprint of the leathers grain pattern. This mould is what we call a Grain Pad.
The grain pad can then be used in conjunction with the Leather & Vinyl Weld to emboss the grain pattern of the leather into the Weld.
|
 |
Leather & Vinyl Weld - For an extremely quick fill and an invisible repair |
 |
The Weld is used for filling holes in leather where a quick repair is required.
The product cures in 40 seconds with the use of a Heat Gun or Iron. By using a Grain Pad, you can also imprint a perfect grain pattern into the weld so that the repair blends in invisibly with the surrounding leather.
|