Leather Care & Repair Specialists

Cleaners & Removers

Alcohol Cleaner - removes contaminants on leather before colouring

Before spraying colour onto leather it should always be wiped down first with the alcohol cleaner.

The alcohol cleaner removes all surface grease, grime and other contaminants that could otherwise cause adhesion problems.

More Information

Leather Prep - Strong solvent cleaner used to remove old leather finishes

Ideal for hard, brittle, rough and cracked leather. The leather prep removes the manufactured finish from leather and in cases of older furniture and cars it also removes the coloured coating.

This application considerably softens the leather as you are removing the old hardened finishes.

Use the leather prep before restoring the colour.

More Information

Leather Degreaser - Removes all greasy & Oily stains from leather

The leather degreaser is a thick paste that draws out all oil and grease stains from leather. Common problems are head grease patches that make the leather turn dull, dark and sometimes sticky - the Leather Degreaser will draw the grease, oil and sweat out totally removing the stained area. Stains that it will remove are;

• Head grease patches
• Grease patches on the arm rests
• Coking oil spill, or air freshener spill
• Food spills, e.g. pizza, chips, curry grease etc

More Information

Spew Remover - Removes migrating fatliquors and prevents reoccurrence

Sometimes fatliquors used during the tanning process or natural animal fat within the leather can migrate to the surface leaving a white hazy film, this is known as spew.

Spew can be identified by heating the leather with a hair drier, when warmed up the spew will dissolve. The film can be wiped away or cleaned off with a normal cleaner, but it will always reappear.

The Spew Remover extracts the spew from the leather and penetrates into the leather to prevent the spew recurring.

More Information

Mould Remover - Kills Bacteria on contact eliminating stain & smell

Mould Remover has been designed to remove stains caused by the growth of mould on leathers exposed to high humidity, moisture or dampness.

The product removes odours caused by mould, mildew, food, bacteria and other organic based odours.

As well as eliminating the odour, mould remover is also capable of removing mould stains. However, it cannot always remove stains that have caused a black mark to appear.

More Information

Acid Wipe - Increases the absorption of dye into leather

The Acid Wipe is an acidic product used to reduce the Alkalinity of leather to help dyes bond better to the leather.

Pre-treating the leather with the Acid Wipe helps achieve a richer and deeper colour when dye is applied and also helps create a more even coverage of dye.

More Information

Colour Charts pre-mixed colours for furniture & car interior